Custom Ribbon
Cable Assemblies

XSD Harness manufactures custom ribbon cable assemblies according to customer drawings, pinouts, connector part numbers, conductor requirements and dimensional specifications.

Depending on the project, assemblies may include IDC connectors, discrete terminations, color-coded conductors, protective processing and customer-defined labeling.

Upload Drawing & Get a QuoteView Ribbon Cable Options

What Is a Ribbon Cable Assembly?

A ribbon cable assembly uses multiple insulated conductors arranged side by side in a flat, parallel structure. This geometry keeps circuits organized, supports compact routing, and can simplify multi-position termination when compatible connectors are used.

XSD manufactures ribbon cable assemblies according to customer-defined conductor count, cable construction, connector type, pinout, overall length and inspection requirements.

Why Use Ribbon Cable Assemblies?

Compact Routing

A flat profile can simplify routing inside space-constrained electronic assemblies.

Organized Circuit Layout

Defined conductor order makes circuits easier to identify and trace.

Efficient Multi-Position Termination

Compatible IDC systems can terminate multiple conductors in one operation.

Simplified Installation

Flat geometry makes routing and assembly more predictable in equipment.

Visual Identification

Color-coded constructions help distinguish circuits during assembly.

Custom Ribbon Cable Assembly Types

Start with the cable construction and termination method. Each configuration is reviewed against the approved specification.

Round-Conductor Flat Cable Assemblies

Parallel insulated round conductors arranged in a flat ribbon construction for organized multi-circuit routing.

Rainbow Ribbon Cable Assemblies

Color-coded conductors for easier circuit identification. Confirm the color sequence, count and availability of the selected cable.

IDC Ribbon Cable Assemblies

Ribbon cables terminated to compatible insulation-displacement connectors using specified conductor and pin assignments.

Discrete-Terminated Ribbon Assemblies

Cable split or prepared at one or both ends for crimped, soldered or other customer-defined terminations.

Shielded Ribbon Cable Assemblies

Customer-specified shielded flat constructions, subject to confirmation of sourcing, shield termination and grounding requirements.

Molded Ribbon Cable Assemblies

Molded strain relief or connector protection where the design, materials and tooling are compatible with XSD’s process.

Twisted-pair, bonded, intermittently bonded and hybrid ribbon constructions require separate review of sourcing and assembly experience.

IDC Ribbon Cable Assemblies

IDC connectors are widely used with ribbon cables because multiple conductors can be terminated in a defined pattern without individually stripping and crimping each wire. For compatible projects, XSD can manufacture assemblies using customer-specified IDC connector systems, conductor counts and pin assignments.

Review connector brand and series, pin count, conductor count, cable length, strain relief, orientation, keying, pinout and color coding together. Cable conductor spacing and size must match the selected contact system.

Support for a particular IDC pitch or connector family is confirmed for the project, not assumed from appearance.

Check both ends before release

End A

Connector part number
Keying & pin 1
Orientation

End B

Mating interface
Pin assignment
Strain relief

Document conductor-to-pin assignments, viewing direction and length reference points on the drawing.

Send your pinout for review

Custom Ribbon Cable Assembly Options

Define the finished assembly, not only the cable. Connector orientation and measurement reference points help avoid ambiguity when samples move into production.

Parameter Customization
Conductor count According to approved cable specification
Conductor size Based on selected ribbon cable
Cable length Custom overall length and defined tolerances
Connector Customer-specified connector system
Pinout Custom circuit assignment
Color coding Gray or multi-color where available
End preparation IDC, crimp, solder or open-wire where supported
Connector orientation Straight/right-angle where the connector system permits
Protection Heat shrink, sleeve, tape, molded strain relief
Labeling Custom identification
Packaging Project-specific requirements

Connector Options for Ribbon Cable Assemblies

IDC Socket Connectors

For multi-position board or header connections with a compatible cable and mating system.

Board-to-Wire Connectors

Selected according to the board interface, housing, terminals and approved wire preparation.

D-Sub or Other Multi-Pin Interfaces

For designs adapting ribbon conductors to a larger external connector, subject to termination review.

Mixed Termination Assemblies

IDC at one end and another connector or discrete termination at the other, with a documented circuit map.

Specify approved component part numbers and the sourcing route. No universal brand, series or pitch coverage is implied.

How XSD Manufactures Ribbon Cable Assemblies

  1. Requirement Review

    Review cable type, conductor count, connector, pinout, dimensions and quantity.

  2. Cable Preparation

    Cut the flat cable to specified length and prepare ends for the selected termination.

  3. Termination

    Install compatible IDC connectors, crimped contacts, soldered connections or other specified terminations.

  4. Pinout / Circuit Assembly

    Confirm conductor-to-pin assignment against the approved drawing.

  5. Protection & Finishing

    Add strain relief, heat shrink, identification or molding where required.

  6. Inspection

    Check visual, dimensional and electrical requirements under the project quality plan.

Manufacturing Capabilities Behind Our Ribbon Cable Assemblies

XSD’s documented resources support cable preparation, terminal crimping, connector insertion, selected soldering, vertical and low-pressure injection molding, electrical testing, dimensional inspection and tensile testing.

Cable preparation equipment
Terminal processing equipment
Vertical injection molding
Low-pressure injection molding

Cable Preparation

Cutting and dimensional preparation to approved requirements.

Connector Assembly

Installation of compatible connector systems and terminals.

Soldering

Selected soldered cable assembly operations.

Molding

Optional molded strain relief or protection for compatible designs.

Electrical Inspection

Circuit verification and DC resistance checks where applicable.

View XSD manufacturing capabilities

Flat Ribbon Cable Options

XSD’s broader cable manufacturing business has experience with flat ribbon cable constructions, including UL-style flat cable products. This provides familiarity with conductor arrangement, insulation and cable construction.

UL2651UL2678UL2468UL4478UL21016UL20080UL21523UL21370

These UL-style constructions are listed in the broader company profile. Availability for an assembly project must be confirmed against conductor size, voltage and temperature requirements, and connector compatibility.

Style references are not a blanket product certification claim. Current datasheets and applicable certification scope should be checked for the selected cable. The supply route is agreed per project; not every assembly cable is necessarily manufactured in-house.

Ribbon Cable Assembly Testing & Inspection

Inspection methods and sampling requirements are selected according to the approved drawing, connector specification and customer quality plan.

Circuit Verification

Confirm conductor-to-pin relationships against the approved pinout.

DC Resistance Testing

Measure where required by the product specification.

Visual Inspection

Check cable condition, connector installation and workmanship.

Dimensional Inspection

Verify overall length and relevant connector dimensions.

Tensile / Mechanical Inspection

Apply where the termination or strain-relief design requires it.

The company profile also documents wire sequence testers, CCD inspection and plug/pull equipment. Signal performance depends on conductor geometry, cable construction, grounding arrangement, connector system, length and application-specific electrical requirements. High-speed performance, crosstalk and controlled impedance require a defined construction and validation method.

Ribbon Cable Assemblies for OEM Applications

Industrial Control Equipment

Internal board and control-panel connections with defined installation and service requirements.

Consumer Electronics

Compact multi-conductor interconnections within electronic devices.

Robotics & Automation

Controller, sensor and module connections; motion requirements need project-specific review.

Medical Equipment

Internal electronic connections in diagnostic and instrument systems, subject to the customer’s qualification requirements.

Printers & Office Equipment

Multi-conductor internal signal and control connections.

Embedded Electronics

Board-to-board and board-to-panel interconnections in integrated equipment.

Why Source Ribbon Cable Assemblies from XSD?

Flat Cable Manufacturing Background

Documented experience with flat ribbon cable constructions in the broader XSD cable business.

Build-to-Print Assembly

Manufacturing to customer drawings, pinouts and connector requirements.

Multiple Termination Processes

Compatible IDC, selected crimping, soldering and connector assembly depending on design.

Molding Capability

Optional molded protection or strain relief for compatible assemblies.

Inspection Resources

Electrical, dimensional and mechanical inspection resources matched to the quality plan.

Prototype to Production

Support for development samples, first articles and repeat production.

From Ribbon Cable Prototype to Production

  1. Send Requirements

    Share drawing, pinout and connector details.

  2. Technical Review

    Confirm cable construction and termination method.

  3. Quotation

    Agree quantities, sourcing, tooling and commercial requirements.

  4. Prototype / First Article

    Build against the agreed specification.

  5. Approval

    Confirm the accepted sample and controlled documents.

  6. Production

    Manufacture to the released requirements.

  7. Inspection & Packaging

    Complete agreed checks, identification and packing.

What We Need to Quote Your Ribbon Cable Assembly

Send the available drawing, BOM, pinout or sample information. Missing specifications can be identified during the review.

  • Ribbon cable type
  • Conductor count
  • Conductor size
  • Connector part number
  • Pin count
  • Pinout
  • Cable length
  • Connector orientation
  • Color coding requirement
  • Shielding requirement
  • End preparation
  • Strain relief / molding requirement
  • Quantity
  • Test requirements
  • Drawing or sample

    Your ribbon cable project









    One file up to 10 MB. Combine multiple documents in a ZIP file.

    Frequently Asked Questions

    Can XSD manufacture custom IDC ribbon cable assemblies?

    For compatible projects, XSD can assemble customer-specified IDC systems. Send the connector part number, cable specification, conductor count and pinout so compatibility and the termination process can be reviewed before quotation.

    What ribbon cable types can XSD support?

    Projects may use round-conductor flat cable, rainbow cable, IDC assemblies or discrete-ended configurations. Shielded and molded versions require confirmation of cable availability, termination details and process compatibility.

    Can conductor count and cable length be customized?

    Yes, according to the approved cable and connector combination. Specify conductor count, conductor size, overall length, tolerances and the reference points used to measure the finished assembly.

    Can you manufacture rainbow ribbon cable assemblies?

    Color-coded ribbon constructions can be reviewed for your project. Confirm the cable part number or color sequence, conductor size and count, along with connector and circuit requirements. Availability depends on the selected construction.

    Can ribbon cable assemblies use different connectors at each end?

    Mixed termination assemblies can be reviewed, including an IDC connector at one end and another connector or discrete terminations at the other. Provide both mating interfaces and a complete conductor-to-pin map.

    Can you integrate strain relief or molded protection?

    Heat shrink, sleeves, tape and molded strain relief can be considered where compatible with the design. Material, geometry, tooling and protection requirements are reviewed before the process is approved.

    What inspection methods are available?

    Available resources include circuit verification, DC resistance measurement, visual and dimensional inspection, and mechanical testing where applicable. The approved drawing and customer quality plan determine methods and sampling.

    Can you manufacture from an existing sample?

    A sample can support the review, but hidden pin assignments, cable specifications and acceptance criteria still need confirmation. We agree the documented build requirements before proceeding with production.

    Do you support prototype quantities before production?

    Prototype and first-article requirements can be reviewed before repeat production. Quantity, component sourcing, tooling and lead time are confirmed with the quotation; no universal minimum quantity is assumed.

    Start Your Ribbon Cable Assembly Project

    Send your conductor count, connector, pinout, length and protection requirements. XSD will review the assembly against the intended application and inspection needs.

    Upload Ribbon Cable Drawing & Get a Quote