CUSTOM CONNECTOR ASSEMBLIES / OEM

Custom JST
Cable Assemblies

The right wire.
The right terminal.
Every pin in its place.

XSD Harness manufactures custom cable assemblies using customer-specified JST connector systems, terminals, wires and protective components. Assemblies are produced according to approved drawings, BOMs, pinouts, dimensions and inspection requirements.

  • Build-to-Print
  • Custom Pinouts
  • Terminal Crimping
  • Prototype to Production

Upload Drawing & Get a Quote ↗View JST Connector Options ↓

FINISHED ASSEMBLIES / XSD PHOTO LIBRARY

Four complete multi-conductor cable assemblies with white housings

Two-conductor leads
Branched connections

Configuration examples. Connector manufacturer and series are confirmed from part numbers, not appearance.

THE ASSEMBLY, NOT JUST THE CONNECTOR

What Is a JST Cable Assembly?

A JST cable assembly combines a JST connector housing and matching terminals with specified wires, cables and optional protective components to create a finished electrical interconnect. These assemblies serve compact electronic, power, signal and control applications. Size, pitch, current requirements and locking design vary by connector family.

XSD manufactures JST-based assemblies according to customer-defined connector part numbers, wire specifications, pin assignments, cable lengths and inspection requirements.

For compact wire-to-board and low-profile designs, check the mating component as well as the cable-side housing. Pin numbering should be tied to a clearly identified viewing direction. A wire color is useful identification, but it does not replace an approved circuit assignment. These details keep the enquiry focused on the finished interconnect rather than a visually similar connector.

Housing+Terminal+Wire→Approved assembly

START WITH THE PART NUMBER

JST Connector Series We Can Work With

Series selection begins with your design. The families below are manufacturer references for project review, not a confirmed stock or manufacturing availability list. Exact sourcing and tooling must be confirmed before commitment.

Connector-family reference matrix
JST series Interconnect type Typical design context Enquiry
PH ↗ Compact wire-to-board Small electronic assemblies
XH ↗ Wire-to-board General electronic equipment
VH ↗ Wire-to-board Selected power-related connections
ZH ↗ Compact, low-profile Space-constrained devices
GH ↗ Compact locking connection Embedded electronics
SH ↗ Very compact wire-to-board Miniature assemblies
SM ↗ Locking wire-to-wire Disconnectable harnesses
RCY ↗ Wire-to-wire Compact inline connections

Electrical ratings, compatible wire sizes and pitch depend on the exact JST series and part number and should be confirmed against the applicable manufacturer specification. Series links open official JST reference documents.

DEFINE THE BUILD

Custom JST Cable Assembly Options

Connector series

Specify the JST housing, mating connector and approved part numbers.

Terminal

Match the contact to the housing and approved conductor specification.

Wire gauge

Define wire size against the exact terminal and connector combination.

Pinout

Document cavity assignments, circuit configuration and mating-face orientation.

Cable length

Set overall length, branch dimensions and tolerances on the drawing.

Wire color

Identify conductor colors and any required circuit identification.

Protection

Specify heat shrink, sleeves, tubing, tape or labels where required.

Mixed connector ends

Define JST-to-Molex, open-wire, ring-terminal or other approved combinations.

ONE DRAWING. THE REQUIRED CONNECTIONS.

Common JST Cable Assembly Configurations

JST-to-JST cable assembly

JST connector systems at both ends, with the specified wire and pin assignment.

JST-to-open-wire assembly

A connector at one end and conductors prepared to the specified strip or termination dimensions.

JST-to-Molex cable assembly

Mixed-brand interconnection manufactured to the customer BOM and approved sourcing route.

JST-to-ring terminal assembly

Specified ring terminals for selected power or grounding interfaces; confirm dimensions and wire compatibility.

JST-to-board harness

A connectorized wire set matched to the specified PCB header or controller interface.

Multi-branch JST harness

Several specified connectors integrated into a harness with defined branch lengths and circuit routing.

Photographs show assembly structures. Specify the required JST components separately in your BOM.

WIRE → TERMINAL → CAVITY

Terminal Crimping & JST Connector Assembly

JST cable assembly quality depends on the correct combination of wire, terminal, crimp geometry and housing insertion. XSD uses automatic and semi-automatic terminal processing equipment depending on the terminal, wire size, production quantity and approved process requirements.

Automatic terminal processing
Semi-automatic terminal processing
Terminal insertion equipment
Automatic wire cutting

Process controls

  • Wire specification
  • Terminal part number
  • Strip length
  • Crimp geometry
  • Terminal orientation
  • Cavity position
  • Locking / retention features
  • Connection strength
  • Inspection method

Check the terminal-to-wire fit and insertion orientation together. A compact housing does not make different terminal or wire combinations interchangeable.

THE WIRE MATTERS TOO

Wire & Cable Options for JST Assemblies

XSD’s broader wire and cable manufacturing background supports project-specific material review. Wire construction must suit both the application and selected terminal.

Hook-up wire

Individual power, signal or control circuits.

Multi-conductor cable

Grouped circuits where a cable construction is specified.

Shielded cable

Selected signal-sensitive applications, with defined shield termination.

High-temperature wire

Where required by the approved product specification.

Automotive wire

Appropriate vehicle or equipment applications, subject to component compatibility.

Custom cable constructions

Projects aligned with the broader XSD cable manufacturing capability.

COMPACT CONNECTIONS IN YOUR EQUIPMENT

JST Cable Assemblies for OEM Applications

Consumer electronics

Compact board-to-wire connections for devices, controls and electronic assemblies.

Industrial equipment

Signal, power and control connections within machinery and automation equipment.

Robotics & automation

Sensors, small motors, encoders and controller interconnections.

Medical equipment

Low-voltage electronic connections where the product specification calls for JST components.

Automotive & e-mobility

Selected low-voltage electronic and control connections, subject to application requirements.

Energy storage & battery systems

Signal and low-voltage control connections in battery, BMS and related equipment.

VERIFY THE CONNECTION

JST Cable Assembly Testing & Inspection

Incoming inspection, first-article inspection and final inspection frame the agreed production checks. Inspection methods and sampling requirements are selected according to the customer-approved drawing, JST component specification and project quality plan.

Crimp inspection

Evaluate the wire-terminal connection against approved terminal and project requirements.

Pull-force testing

Check mechanical connection strength where required.

Circuit / pinout verification

Confirm correct wire-to-cavity connections and continuity.

Dimensional inspection

Verify wire lengths and relevant assembly dimensions.

Visual inspection

Check terminal insertion, connector housing and assembly condition.

Electrical testing can be incorporated into the approved production inspection plan.

APPROVE ONCE. BUILD TO THE APPROVED REVISION.

From JST Cable Prototype to Production

  1. 01

    Send requirements

    Drawing, JST part numbers, wire specification, pinout and quantity.

  2. 02

    Manufacturing review

    Review component compatibility, crimping method, dimensions and inspection requirements.

  3. 03

    Sample / first article

    Manufacture prototype assemblies for approval where required.

  4. 04

    Customer approval

    Confirm fit, pinout, dimensions and assembly requirements.

  5. 05

    Production

    Move to repeat production using the approved configuration.

MANUFACTURING SUPPORT

Why Source JST Cable Assemblies from XSD?

Build-to-print manufacturing

Customer-approved drawings, BOMs and connector part numbers guide the build.

Terminal processing equipment

Automatic and semi-automatic crimping, selected for the approved combination.

Connector assembly capability

Terminal insertion and housing assembly with defined cavity orientation.

Flexible wire selection

Customer-defined wire and cable constructions reviewed for compatibility.

Inspection resources

Crimp, pull-force, dimensional and electrical inspection matched to the quality plan.

Prototype to production

Sample builds through ongoing OEM production using the approved revision.

SEND THE SPECIFICATION

What We Need to Quote Your JST Cable Assembly

Send the available requirements together. Identify any open questions so the manufacturing review can resolve them before quotation or sample production.

  • JST series
  • Connector housing part number
  • Terminal part number
  • Mating connector
  • Wire gauge
  • Wire type
  • Wire colors
  • Pinout
  • Cable length
  • Branch lengths
  • Quantity
  • Protection requirements
  • Test requirements
  • Drawing / sample / BOM

    Your JST assembly project









    One file up to 10 MB. Combine multiple documents in a ZIP file.

    PROJECT QUESTIONS

    Frequently Asked Questions

    Can XSD manufacture using customer-specified JST part numbers?

    Submit the housing, terminal and mating part numbers with your drawing and BOM. XSD reviews sourcing, wire compatibility, tooling and inspection requirements before confirming the build. Approved component references guide manufacture.

    Which JST connector series can XSD work with?

    Availability is confirmed per project, not across an entire catalog. The PH, XH, VH, ZH, GH, SH, SM and RCY references above help identify your enquiry. Purchasing and manufacturing review must confirm the exact parts and assembly process.

    Can you manufacture JST PH, XH or VH cable assemblies?

    Send the exact PH, XH or VH housing and terminal part numbers for review. Family names alone do not establish component availability or tooling compatibility. Manufacturing feasibility is confirmed against your wire specification and assembly requirements.

    Can you build JST-to-Molex or mixed-connector assemblies?

    Mixed-connector projects can be reviewed against a customer-approved BOM. Specify both connector systems, contact part numbers, wire sizes and the circuit mapping between ends. Each termination must suit the selected wire.

    Can wire length, color and pinout be customized?

    Yes. Define lengths, colors, branch dimensions and pin assignments in the approved drawing. Include end orientation and tolerances so assembly and inspection use the same reference.

    What information is required for a quotation?

    Provide the JST series, housing and terminal part numbers, mating connector, wire gauge and type, colors, pinout, lengths, quantity, protection and test requirements. A drawing, sample or BOM helps establish the remaining scope.

    What crimp inspection methods are available?

    Resources include terminal cross-section analysis, pull-force testing and visual inspection, alongside dimensional and circuit checks. The component specification and project quality plan determine methods, acceptance criteria and sampling.

    Can you manufacture from an existing physical sample?

    A physical sample can support a manufacturing review. Connector identification, wire construction, hidden connections and acceptance requirements still need confirmation. Approve the resulting drawing and BOM before repeat production.

    Can you support prototype quantities before production?

    Prototype and first-article builds can be reviewed before repeat production. Share the initial quantity, expected ongoing volume and schedule. Component availability, tooling needs and sample approval determine the agreed plan.

    JST and J.S.T. are trademarks of J.S.T. Mfg. Co., Ltd. XSD Harness is an independent cable assembly manufacturer and is not affiliated with or endorsed by JST unless otherwise stated. Brand names are referenced only to identify customer-specified connector components used in custom assemblies.

    YOUR COMPONENTS. YOUR PINOUT.

    Start Your JST Cable Assembly Project

    Send your drawing, JST component references and wire specification for a manufacturing review.

    Upload Drawing & Get a Quote ↗