OEM DISPLAY INTERCONNECTS

Custom Display
Cable Assemblies

From your control board
to your display.

XSD Harness manufactures custom display cable assemblies for TFT, LCD, embedded display, control panel and electronic equipment applications. Assemblies follow customer-approved drawings, pinouts, connector specifications, cable types, dimensions and inspection requirements.

Concept illustration of a display module connected to a controller board
Build-to-PrintCustom PinoutsCompact InterconnectsPrototype to Production

FROM THE XSD PHOTO LIBRARY

Connectorized
assembly examples

Exact interfaces and ratings follow the approved BOM.

Display interface assembly
Signal connector assembly
Compact discrete-wire leads

THE CONNECTION IN CONTEXT

What Is a Display Cable Assembly?

A display cable assembly connects a display module to a PCB, controller, driver board or other electronic device. Depending on the interface, it may carry video signals, control signals, power, backlight connections or other electrical functions.

The design depends on the interface, available routing space, connector system, pinout, shielding and electrical requirements. An LCD wiring harness must match both the display and the electronics driving it.

Controller / PCBSpecified interconnectTFT / LCD module

START WITH THE INTERFACE

Display Cable Assembly Types

Choose the interface in your design, then confirm the cable and connector system. Each assembly type is subject to component sourcing and process review.

LVDS

TFT and LCD connections using low-voltage differential signaling, as specified by the system design.

eDP

Embedded DisplayPort interconnects for compact display systems and electronic equipment.

FFC / FPC

Low-profile flexible interconnections for space-constrained board-to-display routing.

Micro-coax

Multiple miniature coaxial conductors for compact, high-density display signal paths.

Discrete wire

Custom leads for display power, control signals, auxiliary circuits and backlight connections.

Hybrid

Signal, power and control circuits combined to suit the equipment architecture.

Pitch, conductor count, cable length and electrical performance depend on the selected display interface and component system.

TFT / LCD TO DRIVER BOARD

Custom LVDS Cable Assemblies

LVDS cable assemblies connect TFT/LCD modules to driver boards or control electronics using low-voltage differential signaling. For a custom LVDS cable, define the connector part numbers, pinout, wire or cable construction, shielding, length and routing requirements.

XSD reviews the specified components and termination process before confirming manufacture. Electrical performance depends on the selected components and approved assembly specification.

  • Connector type
  • Pinout
  • Wire gauge
  • Cable length
  • Shielding
  • Twisted pairs
  • Labels
  • Branch wires
  • Power / backlight leads
  • Protective sleeving
Begin with the pinout.

Show the mating-face orientation and differential-pair assignment, together with any separate power or backlight leads.

EMBEDDED DIGITAL DISPLAYS

Custom eDP Cable Assemblies

Embedded DisplayPort assemblies are used in compact display systems with high-density digital connections. XSD reviews build-to-print eDP projects using customer-specified cables, connectors, pinouts and dimensional requirements, subject to component and process compatibility.

  • Connector specification
  • Cable length
  • Branch configuration
  • Wire / cable construction
  • Shielding
  • Grounding
  • Labeling
  • Mechanical routing

Specify the intended interface requirements and acceptance method. DisplayPort version, maximum data rate, resolution support and frequency range require design-specific validation.

LOW-PROFILE ROUTING

FFC & FPC Display Interconnects

FFC and FPC interconnects suit low-profile, lightweight board-to-display connections. Customer-specified flexible cable or flexible circuit components can be reviewed for integration into a finished assembly where the required materials and processes are available.

FFC

Flexible flat cable: parallel conductors in a thin, flat cable structure.

FPC

Flexible printed circuit: a patterned circuit on a flexible substrate.

XSD’s assembly scope can include integration of specified FFC/FPC components; fabrication of the flexible printed circuit itself is not assumed. Supply the component drawing, connector interface and required end orientation.

Explore custom cable assembly options →

DENSE SIGNAL ROUTING

Micro-Coax Display Cable Assemblies

Micro-coax assemblies route multiple miniature coaxial conductors through limited space. Projects are reviewed against the specified cable construction, compatible connector system, termination method and inspection requirements before manufacturing scope is confirmed.

Potential uses include compact displays, cameras, embedded electronics, medical displays, portable equipment and industrial panels. Cable construction alone does not establish the completed assembly’s electrical performance.

Define the whole connection.

Confirm shielding and grounding continuity, routing space and required electrical validation alongside the connector and cable.

YOUR DRAWING SETS THE DETAIL

Custom Display Cable Assembly Options

Capture the electrical and mechanical requirements in one controlled specification. Review substitutions and drawing revisions before production.

Shielded cable construction example

Send your specification →

Build-to-print customization matrix
Parameter Customization
Interface type LVDS, eDP, FFC/FPC, micro-coax or discrete wire, subject to project review.
Connector Customer-specified connector system, mating interface and part numbers.
Pinout Custom circuit assignment with clear pin numbering and end orientation.
Length Build-to-drawing overall length, branch dimensions and tolerances.
Conductors Approved wire or cable construction, conductor count and wire gauge.
Shielding Foil, braid or other shielding where required by the design.
Grounding Drain wire, braid termination or a specified grounding arrangement.
Branches Power, backlight, control or auxiliary leads as specified.
Protection Heat shrink, sleeving, tape and labels matched to the assembly.
Molding Where compatible with the selected components, design and process.
Identification Customer part number, revision and identification labels.

FROM SPECIFICATION TO ASSEMBLY

How XSD Manufactures Display Cable Assemblies

  1. 01

    Specification review

    Review the display interface, connector part numbers, pinout, cable construction and dimensions. Resolve missing information before sample manufacture.

  2. 02

    Cable preparation

    Cut and strip the specified cable or wire. Prepare shields and conductors to the dimensions required for the selected termination.

  3. 03

    Terminal / connector processing

    Apply crimping, soldering or connector assembly according to component requirements and the approved manufacturing method.

  4. 04

    Pinout assembly

    Insert or terminate conductors according to the approved circuit assignment. Control connector orientation and branch positions.

  5. 05

    Protection & routing

    Add the specified shielding, heat shrink, sleeves, tapes or labels. Check routing and strain relief against the drawing.

  6. 06

    Inspection

    Perform the electrical, visual, dimensional and mechanical checks selected in the approved quality plan. Record the agreed acceptance results.

DOCUMENTED COMPANY RESOURCES

Manufacturing Capabilities Behind Our Display Cables

Wire preparation, termination and assembly processes are selected for the approved component system.

Precision wire preparation

Precision wire preparation

Cutting and stripping to approved dimensions.

Terminal crimping

Terminal crimping

Automatic or semi-automatic termination for compatible systems.

Soldering

Soldering

Selected soldering operations for electronic cable assemblies.

Connector assembly

Connector assembly

Terminal insertion and housing assembly.

Protective processing

Protective processing

Heat shrink, sleeving, molding and dispensing where required.

The company profile also documents semi-automatic terminal processing, RJ45 crimping, low-pressure injection molding and UV dispensing. Process suitability is confirmed for each display cable design.

Explore manufacturing capabilities →

ACCEPTANCE AGAINST YOUR SPECIFICATION

Display Cable Assembly Testing & Inspection

Test methods are selected according to the approved display cable specification and customer quality requirements.

Electrical inspection

  • Wire sequence testing
  • DC resistance testing
  • Harness testing

Visual / dimensional

  • CCD inspection
  • Projection measurement

Termination quality

  • Terminal cross-section analysis
  • Tensile testing
Wire sequence tester
DC resistance tester
Wire harness tester
CCD inspection
Projection measurement
Terminal cross-section analyzer
Tensile tester

General electrical and mechanical checks do not establish high-speed interface compliance. Eye diagrams, BER, signal-integrity analysis, impedance measurements and high-speed compliance validation require a separately confirmed test plan and capability.

THE COMPLETE SIGNAL PATH

Key Electrical Requirements for Display Cable Assemblies

Display cable performance depends on the complete interconnect design: interface specification, cable construction, connector system, termination method, shielding and routing.

Define the interface

  • Interface type
  • Cable type
  • Connector system
  • Impedance requirement, if applicable

Define the route

  • Cable length
  • Shielding
  • Grounding
  • Mechanical routing

Define acceptance

  • Differential-pair requirements
  • Required electrical validation
  • Agreed test methods and acceptance limits

XSD manufactures assemblies according to customer-approved electrical and mechanical requirements. Include the validation requirements in the RFQ so the required methods and resources can be reviewed before commitment.

BUILT AROUND YOUR EQUIPMENT

Display Cable Assemblies for OEM Applications

Industrial HMI & control panels

Display interconnections in machinery and automation equipment.

Medical equipment

Display connections in diagnostic and monitoring systems.

Consumer electronics

Compact display assemblies in electronic devices and peripherals.

Automotive electronics

Selected instrument, infotainment and display systems.

Robotics & automation

Compact display or vision-system connections in automated equipment.

Embedded systems

Board-to-display connections in controllers, terminals and electronic modules.

MANUFACTURING THAT FOLLOWS THE DRAWING

Why Source Display Cable Assemblies from XSD?

Build-to-print manufacturing

Approved drawings, BOMs, connector specifications and pinouts guide the build.

Wire & cable manufacturing background

Supported by the broader XSD wire and cable manufacturing business.

Multiple termination processes

Crimping, soldering, insertion and assembly selected for component compatibility.

Compact assembly experience

Small connectors and multi-conductor assemblies reviewed against actual process capability.

Inspection resources

Electrical, dimensional and mechanical checks matched to the quality plan.

Prototype to production

Development builds and repeat manufacturing organized around approved specifications.

SEND THE REQUIREMENTS TOGETHER

What We Need to Quote Your Display Cable Assembly

A clear drawing and pinout help establish the assembly scope. Include a sample when available and identify any unresolved requirements for review.

  • Display type / interface
  • Drawing
  • Cable specification
  • Connector part numbers
  • Pinout
  • Overall length
  • Branch lengths
  • Shielding requirements
  • Grounding method
  • Quantity
  • Application
  • Test requirements
  • Sample, if available

    Send your display cable requirements








    One file up to 10 MB. Combine multiple documents in a ZIP file.

    BEFORE YOU SEND YOUR RFQ

    Frequently Asked Questions

    Can XSD manufacture custom LVDS display cables?

    Submit the connector part numbers, pinout, cable construction and drawing for review. XSD evaluates the required materials, termination tooling and inspection plan before confirming an LVDS assembly project. Electrical performance follows the approved specification.

    Can you produce eDP cable assemblies?

    Build-to-print eDP projects are reviewed against the specified cable, connectors, pin assignment and routing requirements. Confirm component availability, process compatibility and required validation before ordering; an interface name alone does not establish data rate or resolution support.

    Can you integrate FFC or FPC components into a display cable assembly?

    Customer-specified flexible flat cables or flexible printed circuit components can be reviewed for integration into a finished assembly. Availability and assembly compatibility need confirmation. This service does not imply that XSD fabricates the flexible printed circuit itself.

    Can display cable length and pinout be customized?

    Yes, length, branch dimensions and circuit assignment can be defined in the approved drawing. Include connector orientation, mating-face pin numbering and tolerances so both ends can be assembled and inspected against the same reference.

    Can you build display cables from an existing sample?

    A sample can support a feasibility review. Please also provide the display interface, connector identification, intended application and test requirements. Hidden cable construction and electrical acceptance criteria need confirmation before a sample is converted into a production specification.

    What connector brands can be used?

    Specify the manufacturer, series, exact part numbers and approved sourcing route in your BOM. XSD reviews availability and tooling compatibility. Brand references identify requested components and do not represent an authorization or certification claim.

    What testing is available for display cable assemblies?

    Documented resources include wire sequence, harness and DC resistance testing, CCD inspection, projection measurement, terminal cross-section analysis and tensile testing. The approved quality plan determines their use. Specialized signal-integrity or interface-compliance validation needs separate confirmation.

    Do you support prototype quantities before production?

    Prototype and repeat-production projects can be reviewed. Send the required quantity, expected production volume and target schedule. Sample approval, component availability and any tooling requirements determine the agreed manufacturing plan.

    YOUR DISPLAY. YOUR SPECIFICATION.

    Start Your Display Cable Assembly Project

    Send your drawing, cable specification and pinout. We’ll review the required assembly process, components and inspection scope.

    Upload Drawing & Get a Quote ↗