Molex Cable Assemblies
Custom connector assemblies using specified Molex connector families where required by the customer’s BOM.
Confirm housing, terminal and contact part numbers, mating components and the approved sourcing route.
OEM INTERCONNECTIONS / BUILD TO PRINT
XSD Harness manufactures custom cable assemblies for OEM applications according to customer drawings, BOMs, connector specifications and approved technical requirements. Our manufacturing processes include wire cutting and stripping, terminal crimping, connector assembly, soldering, molding, protective processing and electrical inspection.
XSD Harness is the specialized wire harness and cable assembly business of Dongguan XSD Cable Technology Co., Ltd.
Connector · cable · pinout · length · protection
THE FINISHED INTERCONNECTION
A custom cable assembly combines electrical wires or cables with connectors, terminals, contacts, protective components and other specified parts into a finished interconnection product. Unlike standard off-the-shelf cables, custom assemblies are manufactured to defined electrical, dimensional, mechanical and environmental requirements.
XSD manufactures cable assemblies according to customer drawings, wiring diagrams, BOMs, connector part numbers, samples or approved specifications.
Typically focuses on one or more cables terminated with connectors or contacts for a defined electrical interface—point-to-point connections, compact electronic interfaces and specified power or signal assemblies.
Typically organizes multiple wires, branches, connectors, protection and routing into a larger electrical distribution system. There can be overlap; the drawing and intended installation define the product.
CHOOSE THE INTERFACE, DEFINE THE ASSEMBLY
Explore the assembly families below, then share the connector, cable and application details for your project. Photographs illustrate supplied assembly examples; the approved BOM—not the image—defines the exact components.
Custom connector assemblies using specified Molex connector families where required by the customer’s BOM.
Confirm housing, terminal and contact part numbers, mating components and the approved sourcing route.
Compact connectorized assemblies for electronics, equipment and control applications.
Specify the JST series, pitch, circuit count, wire size and mating connector rather than selecting by appearance.
Assemblies for selected signal and communication applications where RF connector systems are specified.
Define the connector interfaces, cable, impedance and any frequency or validation requirements for review.
Custom coaxial assemblies with specified cable, connector and length requirements.
Confirm the cable construction, terminations, finished length and electrical acceptance criteria.
Cable assemblies for displays, control panels and electronic interfaces.
Provide connector details, pin assignments, cable routing and the required interface verification.
Flat ribbon assemblies for compact electronic interconnections.
Define conductor count, connector orientation, pitch, length and the required identification.
Flexible flat cable assemblies for space-constrained electronic applications.
Specify contact pitch, contact count, exposed contact geometry, same-side or opposite-side orientation and length.
Custom power and battery cable assemblies for energy, equipment and electrical systems.
Review conductor size, terminal interfaces, polarity, insulation and the approved electrical requirements.
For Molex, JST, TE, Amphenol and other brands, use approved part numbers and sourcing requirements. XSD does not claim to be an official or authorized manufacturer for those brands on this page.
YOUR PRODUCT DEFINITION
Custom cable assemblies are manufactured according to the approved product definition rather than a fixed catalog specification. Depending on the project, XSD can work from customer drawings, wiring diagrams, BOMs, connector part numbers, wire specifications, samples and inspection requirements.
Confirm the mating interface and pin assignments as well as the cable dimensions. When revisions change, the approved drawing and BOM should identify the same assembly so production and inspection follow one product definition.
PROCESS SELECTION FOR YOUR ASSEMBLY
Cable assembly processes include wire cutting, stripping, terminal crimping, connector insertion, soldering, injection molding and final assembly. The manufacturing route is selected for the approved interface, materials, quantity and inspection requirements.
Prepared to customer-specified dimensions. Wire length, strip length and conductor preparation are reviewed for the connection method.
Automatic and semi-automatic processing according to the selected terminal and wire combination. Crimp criteria follow approved specifications.
Terminal insertion, cavity positioning and final connector assembly, including specified seals and secondary locks where applicable.
Selected soldered interfaces and specialized electronic cable assemblies, with the connection and inspection method agreed for the product.
Molded strain relief, component protection and connector integration where required. Environmental performance depends on design and validation.
Circuit testing, resistance testing, dimensional inspection and selected mechanical inspection according to project requirements.
Processes are combined as required by the product. Not every cable assembly needs soldering, overmolding or every available inspection method.
SPECIFY THE COMPONENTS THAT MATTER
Materials and components are selected by project. The company’s wire and cable background supports the review of conductor construction, insulation, jackets and finished assembly requirements; it does not make every option standard on every product.
Conductor size, strand construction and the selected termination must be reviewed together.
These material families appear in the company profile. Suitability for the finished assembly is confirmed with the selected cable and application.
Brand, part number, compatibility and sourcing are agreed before production.
Braided sleeving can be reviewed when specified; it is not listed here as a confirmed standard option or in-house braiding operation.
ASSEMBLIES DEFINED BY THE EQUIPMENT
A cable assembly is reviewed for the equipment interface and installation, not simply for an industry label. Share the operating environment, routing constraints and inspection requirements with the drawing.
Connectorized power, signal and control cable assemblies for machinery and automation systems.
Specified connector, power and signal interfaces for vehicle electrical applications.
Interconnect assemblies for sensors, motors, encoders and control systems. Flexibility and movement requirements are reviewed for the installation.
Power, signal and battery cable assemblies for battery systems, cabinets and related equipment.
Connectorized assemblies for defined equipment interfaces, with the required materials and inspection criteria specified for the project.
Compact cable connections for displays, control interfaces and electronic equipment.
PROJECT-SPECIFIC ACCEPTANCE
XSD’s documented inspection resources include wire sequence testing, DC resistance testing, terminal cross-section analysis and tensile testing. The inspection plan connects the approved product specification to the checks required for production.
Electrical inspection can be incorporated into the production control plan according to the approved product specification. No site-wide “100% testing” statement or universal electrical limit is assumed here.
The test method, acceptance limits and sampling or coverage requirements should be agreed before release. Equipment resources are shown below; individual equipment availability is not a finished-product certification.
FROM INITIAL REQUIREMENTS TO REPEAT BUILDS
The early review establishes the assembly definition before repeat production. Components, tooling, sample quantities, timing and acceptance criteria are agreed for the project.
Drawing, BOM, sample, connector data and quantity.
Manufacturability, materials, termination method and inspection requirements.
Quotation and prototype / sample build.
Customer reviews dimensions, function and assembly.
Move to repeat production according to approved requirements.
Prototype to production support does not imply a fixed lead time, universal minimum order or automatic sample approval.
WIRE KNOWLEDGE + FINISHED ASSEMBLY PROCESSES
XSD Harness is supported by the broader wire and cable manufacturing capabilities of Dongguan XSD Cable Technology Co., Ltd. This background provides direct experience with conductor, insulation and cable construction options used in custom cable assembly projects.
The broader company manufactures wires and cables in addition to finished assemblies, giving it direct experience with conductor and insulation structures.
Cutting, crimping, soldering, insertion, molding and assembly are supported within the company’s manufacturing system.
Assemblies can be built around customer-specified connectors, terminals and pinouts.
Electrical, crimp, dimensional and mechanical inspection equipment is available for project-specific quality plans.
Support from early sample builds through ongoing repeat production.
DOCUMENTED MANUFACTURING RESOURCES
These equipment types are documented in the company profile. Open a photograph for a closer view, or visit Capabilities for process controls and the broader manufacturing route.
BEFORE YOU SEND YOUR DRAWING
Send a drawing, BOM, connector specification or wiring diagram together with the order quantity and application requirements. Cable length, conductor size, pinout, protection, inspection criteria and any available sample information help define the manufacturing scope.
An existing sample can support the manufacturing review. Dimensions, connections, materials, component identities and inspection criteria should be documented and approved before production; a sample alone may not identify every electrical or environmental requirement.
Assemblies can be reviewed using customer-specified connector and terminal part numbers. Exact series, compatibility, sourcing and component availability must be confirmed. Brand names identify requested components; they do not imply official authorization by those brands.
The company profile documents vertical and low-pressure injection molding resources. Tooling, materials, strain relief and component protection are reviewed for each product. Waterproofing, an IP rating or a specific flame rating requires the approved design and supporting validation.
Documented resources cover wire sequence, harness electrical and DC resistance testing; cross-section, tensile and plug/pull testing; CCD and projection inspection; bending and salt spray testing. Inspection methods and acceptance criteria are selected according to the approved project specification.
Prototype and small-run requirements can be reviewed before repeat production. Component sourcing, tooling, quantities, lead time and sample approval requirements are agreed for the project. No universal minimum order or fixed sample delivery time is promised here.
Yes, the assembly can be defined around the customer’s approved length, pinout, labels, sleeves and protective components. Changes should be recorded in the drawing or BOM so manufacturing and inspection use the same product definition.
The company profile includes industrial equipment, automotive, robotics and automation, energy storage, medical equipment and consumer electronics applications. Each cable assembly is reviewed for its specific electrical interface, installation and operating requirements.
START WITH YOUR APPROVED REQUIREMENTS
Send us your drawing, BOM, connector specification, wiring diagram or sample information. Our team will review the manufacturing requirements and prepare a quotation based on the approved project details.
Part numbers, cable or wire specification, length, pinout, quantity, application environment and inspection criteria.
Dongguan XSD Cable Technology Co., Ltd.
info@xsdharness.com · +86 15814198581
Standard RFQs are typically reviewed within 1–3 business days.