CUSTOMER-SPECIFIED CONNECTOR SYSTEMS

Custom Molex
Cable Assemblies

XSD Harness manufactures custom cable assemblies using specified Molex connector systems, wires, terminals and protective components according to customer drawings, BOMs and pinout requirements.

Build-to-PrintCustom PinoutsPrototype to ProductionElectrical Inspection

Independent assembly manufacturing. Connector part numbers and sourcing follow the approved BOM.

FINISHED ASSEMBLIESReal XSD product photographs
Sleeved connectorized assembly
Branched assembly example
Connector-to-terminal examples

Photos illustrate finished construction. Exact Molex series, housing and terminal part numbers require BOM confirmation.

THE COMPLETE INTERCONNECTION

What Is a Molex Cable Assembly?

A Molex cable assembly combines a Molex connector system with specified wires or cables, terminals, contacts and protective components to create a finished electrical interconnection.

The assembly may carry power, signals, control circuits or a combination of functions, depending on the selected connector family and application. XSD manufactures these assemblies according to customer-approved connector part numbers, pin assignments, wire specifications, lengths and inspection requirements.

For an OEM buyer, the key deliverable is the complete assembly that fits the equipment and connects the correct circuits. Confirm the mating interface and connector-to-wire compatibility before treating two similar-looking housings as equivalent.

DRAWING + BOM + PINOUT

Customization Options for Molex Cable Assemblies

Define the electrical interfaces and assembly details before production. Each choice must work with the selected connector system.

Connector specification

Customer-defined Molex connector family, housing part number, circuit count and mating interface. Confirm keying, orientation and any required locking features.

Terminal / contact

Specify the terminal or contact matched to the conductor and connector system. Wire size, insulation diameter and contact requirements govern the approved combination.

Wire / cable

Define AWG, conductor construction, insulation, color and cable construction. Material selection follows the application and component documentation.

Pinout

Specify circuit positions and wiring sequence, including the viewing direction of the connector drawing. Identify unused cavities and any special circuit checks.

Length

Control overall length, branch lengths, strip dimensions and the measurement reference points. State tolerances instead of relying on a photograph.

Protection

Select heat shrink, sleeving, tubing, tape, labels or molded strain relief where required. Seals, clips, ferrites, markings and cable glands are reviewed against the BOM and available process.

OEM APPLICATIONS

Molex Cable Assemblies for OEM Applications

Connector families and assembly requirements vary by equipment. Application review does not imply a universal electrical rating or sector-specific approval.

Industrial Equipment

Power, control and signal connections within machinery and automation systems.

Explore application →

Automotive & Vehicle Equipment

Connectorized assemblies for selected vehicle and equipment electrical systems.

Explore application →

Medical Equipment

Custom electrical interconnections for diagnostic and equipment applications, to approved requirements.

Explore application →

Robotics & Automation

Sensor, actuator, encoder, motor and control wiring. Routing and movement requirements need project review.

Explore application →

Consumer & Electronic Equipment

Board-to-wire and device interconnections for electronic products.

Explore application →

CONTROLLED MANUFACTURING

How XSD Manufactures Custom Molex Cable Assemblies

XSD connects the approved drawing and BOM to a manufacturing route for the complete connector cable assembly.

Wire Preparation

Cutting and stripping follow approved dimensions. Wire identification and conductor preparation support the specified termination process.

Terminal Crimping

Automatic or semi-automatic equipment processes terminals based on the selected wire and contact. Setup follows the approved component combination.

Terminal Inspection

Crimp quality is evaluated against the inspection plan. Required checks can include cross-section analysis and pull-force testing.

Connector Insertion

Terminated wires are inserted into specified connector cavities according to the approved pinout. Circuit identity and terminal retention requirements guide assembly.

Assembly & Protection

Sleeving, tubing, heat shrink, labels, ties or molding are added where required. Branch routing and protection follow the product design.

Electrical Inspection

Finished assemblies are checked against project-specific electrical and dimensional requirements before final release.

Automatic wire cutting equipment
Terminal insertion equipment

WIRE → TERMINAL → HOUSING

Terminal Crimping for Molex Connector Assemblies

Crimping requirements depend on the selected terminal and conductor combination. XSD uses automatic and semi-automatic terminal processing equipment and can incorporate pull-force testing and cross-section analysis into the inspection process where required by the project specification.

Review conductor size, insulation diameter, terminal part number and the relevant application specification together. A connector housing alone does not define a suitable crimp. Tooling suitability and acceptance criteria must be agreed for the actual assembly.

Explore terminal crimping capability →

Automatic terminal crimping machine
Semi-automatic terminal machine

WIRE & CABLE MANUFACTURING BACKGROUND

Wire & Cable Options for Molex Assemblies

XSD’s broader wire and cable manufacturing background supports material discussions beyond the connector housing. Final construction follows the approved project specification.

Hook-Up Wire

Individual conductors for specified power or signal circuits, with the required gauge, color and insulation.

Multi-Conductor Cable

Grouped electrical circuits with defined core count, jacket requirements and conductor identification.

Shielded Cable

Selected signal and interference-sensitive applications, including an agreed shield termination method.

High-Temperature Wire

Appropriate insulation systems where the application’s temperature requirement justifies their selection.

Automotive Wire

Customer-specified automotive wire types and applicable material requirements for the intended equipment.

Custom Cable Constructions

Project-specific cable requirements reviewed against broader XSD cable manufacturing capability.

Wire and cable manufacturing · company profile

Wire selection is not a blanket current, voltage, temperature or certification claim. Connector and wire documentation must support the complete design.

PROTECTION DESIGNED INTO THE ASSEMBLY

Overmolding & Cable Protection Options

Depending on the product design, Molex-based cable assemblies can incorporate heat shrink, sleeving, tubing, tape, labels or molded protection. XSD’s documented manufacturing equipment includes vertical injection molding and low-pressure injection molding machines for selected cable assembly applications.

  • Strain relief at cable exits
  • Connector transition protection
  • Component encapsulation where specified
  • Cable entry reinforcement
  • Environmental protection subject to design validation

Review the housing geometry, material compatibility, tooling and service conditions before specifying molding. No IP67 or IP68 rating is assumed for an unvalidated assembly.

Explore molding capability →

Vertical injection molding machine
Low-pressure injection molding machine

INSPECTION MATCHED TO THE DRAWING

Molex Cable Assembly Testing & Inspection

Inspection methods are selected according to the approved drawing, connector specification and customer quality requirements. Not every assembly requires every listed inspection method.

Electrical

Wire sequence / circuit verification, DC resistance testing and harness electrical testing support the defined circuit requirements.

Crimp

Terminal cross-section analysis and tensile / pull-force testing evaluate specified termination characteristics.

Visual / dimensional

CCD inspection and projection measurement may support appearance, positioning and dimensional checks under the inspection plan.

Wire harness electrical tester
DC resistance tester
Terminal cross-section analyzer
Tensile / pull-force testing equipment
CCD inspection equipment

Acceptance criteria, sampling and records are established for the project. Equipment availability does not mean every method applies to every order.

View wire harness testing resources →

SPECIFY BOTH ENDS

Common Molex Cable Assembly Configurations

These are configuration options for engineering review, not a claim that every connector combination is interchangeable or available from stock.

Molex-to-Molex Cable Assembly

Connectorized assembly with specified Molex connectors at both ends. Define the cavity-to-cavity wiring map and mating interfaces.

Molex-to-Open-Wire Assembly

Molex connector at one end and stripped, tinned or terminated conductors at the other. Specify end preparation and identification.

Molex-to-Ring Terminal Assembly

Connectorized cable with ring terminals for equipment or power connections. Ring geometry, conductor compatibility and insulation requirements follow the drawing.

Molex-to-JST Assembly

Mixed-brand interconnect using customer-specified connectors. Each end uses its own approved contacts and mating components.

Molex-to-Board Assembly

Cable assemblies for board-to-wire applications. Confirm the board-side header part number, orientation and connection requirements.

Multi-Branch Molex Harness

Multiple specified connectors integrated into a branched wiring assembly. Define branch lengths, routing and circuit assignments.

For a complex multi-branch project, include the full harness layout and branch schedule. Review wire harness manufacturing capabilities alongside the broader Custom Cable Assembly page.

APPROVAL BEFORE REPEAT PRODUCTION

From Prototype to Production

  1. 01Send drawing / BOM / connector part numbers
  2. 02Engineering and manufacturability review
  3. 03Quotation
  4. 04Sample / first article
  5. 05Customer approval
  6. 06Production
  7. 07Final inspection and shipment

Resolve component identification, pinout, tooling and inspection questions before production release. Samples establish an agreed reference for subsequent builds. Lead times, sample quantities and production schedules are project-specific and confirmed during quotation.

MANUFACTURING EVIDENCE

Why Source Molex Cable Assemblies from XSD?

Build-to-Print Production

Manufacturing follows customer-approved drawings, BOMs and connector part numbers rather than assumptions based on appearance.

Wire & Cable Manufacturing Background

Access to broader wire and cable manufacturing expertise supports construction and material discussions.

In-House Termination Processes

Cutting, stripping, crimping, insertion, soldering and selected molding processes support the agreed manufacturing route.

Inspection Resources

Electrical, dimensional and mechanical inspection equipment supports project-defined acceptance requirements.

Prototype to Repeat Production

Development builds and production orders follow the agreed technical approvals and controlled specification.

International OEM Experience

The broader company serves customers across international markets. Requirements and documentation are agreed for the specific OEM program.

PROJECT QUESTIONS

Molex Cable Assembly FAQs

Can you manufacture using customer-specified Molex connector part numbers?

Yes. Provide the housing, terminal and mating-component part numbers with your drawing and BOM. XSD reviews the complete connector-to-wire combination and manufacturing requirements before quotation. Component availability and the approved sourcing route are confirmed for each project.

Can you build Molex-to-JST or Molex-to-TE cable assemblies?

Mixed-brand configurations can be reviewed when the connectors, terminals and pin assignments are specified. Each end must be compatible with its own conductor and mating interface. Brands do not imply interchangeability, and substitutions require customer approval.

What information is needed to quote a Molex cable assembly?

Send the drawing or sample, BOM, connector and terminal part numbers, pinout, wire specifications, lengths, order quantity and inspection requirements. Include any protection, labeling, packaging or documentation needs. If information is incomplete, identify which items need engineering clarification.

Can wire gauge, cable length and pinout be customized?

Yes, within the selected connector and terminal system’s requirements. Specify conductor size, insulation diameter, overall and branch lengths, cavity assignments and tolerances. A different wire gauge can require a different terminal, tooling setup or inspection plan.

Do you provide Molex cable assembly overmolding?

Selected assemblies can incorporate molded protection using documented vertical and low-pressure molding equipment. Feasibility depends on the connector geometry, materials, tooling and application. Environmental or ingress ratings must be validated for the finished design rather than assumed.

What testing can be performed on Molex cable assemblies?

Available resources include circuit and wire-sequence verification, DC resistance and harness electrical testing, terminal cross-section analysis, tensile testing and CCD inspection. Projection measurement may be included where required. The approved inspection plan determines which methods apply.

Can you manufacture from an existing sample?

A physical sample can support engineering review, but it does not automatically identify every material or connector part number. Confirm the BOM, mating interface, pinout, dimensions and acceptance criteria before production. Destructive evaluation, if needed, requires agreement.

Do you support prototypes before mass production?

Yes. Development samples or first articles can be reviewed before repeat production. The project moves forward after the agreed technical and quality approvals. Sample quantities, tooling needs and schedules are established for the actual assembly, not promised as a fixed lead time.

Trademark notice. Molex is a trademark of Molex, LLC. XSD Harness is an independent cable assembly manufacturer and is not affiliated with or endorsed by Molex unless otherwise stated. Connector brands are referenced solely to describe customer-specified components used in custom assemblies.

SEND YOUR DRAWING / BOM

Get a Custom Molex Cable Assembly Quote

Tell us which connector system your equipment requires. Share the approved part numbers and assembly information so XSD can review the complete manufacturing requirement.

  • Connector housing, terminal and mating part numbers
  • Wire / cable specification and circuit pinout
  • Overall length, branch lengths and tolerances
  • Quantity, protection and inspection requirements
  • Packaging and documentation requirements

A sample or incomplete drawing is a starting point for clarification, not a substitute for confirmed production requirements.

info@xsdharness.com · +86 15814198581

Upload Drawing & Get a Quote









    One file up to 10 MB. For multiple documents, upload a ZIP file.

    Standard RFQs are typically reviewed within 1–3 business days.

    Enlarged supplied company photograph