Compact Routing
A flat profile can simplify routing inside space-constrained electronic assemblies.
XSD Harness manufactures custom ribbon cable assemblies according to customer drawings, pinouts, connector part numbers, conductor requirements and dimensional specifications.
Depending on the project, assemblies may include IDC connectors, discrete terminations, color-coded conductors, protective processing and customer-defined labeling.
A ribbon cable assembly uses multiple insulated conductors arranged side by side in a flat, parallel structure. This geometry keeps circuits organized, supports compact routing, and can simplify multi-position termination when compatible connectors are used.
XSD manufactures ribbon cable assemblies according to customer-defined conductor count, cable construction, connector type, pinout, overall length and inspection requirements.
A flat profile can simplify routing inside space-constrained electronic assemblies.
Defined conductor order makes circuits easier to identify and trace.
Compatible IDC systems can terminate multiple conductors in one operation.
Flat geometry makes routing and assembly more predictable in equipment.
Color-coded constructions help distinguish circuits during assembly.
Start with the cable construction and termination method. Each configuration is reviewed against the approved specification.
Parallel insulated round conductors arranged in a flat ribbon construction for organized multi-circuit routing.
Color-coded conductors for easier circuit identification. Confirm the color sequence, count and availability of the selected cable.
Ribbon cables terminated to compatible insulation-displacement connectors using specified conductor and pin assignments.
Cable split or prepared at one or both ends for crimped, soldered or other customer-defined terminations.
Customer-specified shielded flat constructions, subject to confirmation of sourcing, shield termination and grounding requirements.
Molded strain relief or connector protection where the design, materials and tooling are compatible with XSD’s process.
Twisted-pair, bonded, intermittently bonded and hybrid ribbon constructions require separate review of sourcing and assembly experience.
IDC connectors are widely used with ribbon cables because multiple conductors can be terminated in a defined pattern without individually stripping and crimping each wire. For compatible projects, XSD can manufacture assemblies using customer-specified IDC connector systems, conductor counts and pin assignments.
Review connector brand and series, pin count, conductor count, cable length, strain relief, orientation, keying, pinout and color coding together. Cable conductor spacing and size must match the selected contact system.
Support for a particular IDC pitch or connector family is confirmed for the project, not assumed from appearance.
Connector part number
Keying & pin 1
Orientation
Mating interface
Pin assignment
Strain relief
Document conductor-to-pin assignments, viewing direction and length reference points on the drawing.
Define the finished assembly, not only the cable. Connector orientation and measurement reference points help avoid ambiguity when samples move into production.
| Parameter | Customization |
|---|---|
| Conductor count | According to approved cable specification |
| Conductor size | Based on selected ribbon cable |
| Cable length | Custom overall length and defined tolerances |
| Connector | Customer-specified connector system |
| Pinout | Custom circuit assignment |
| Color coding | Gray or multi-color where available |
| End preparation | IDC, crimp, solder or open-wire where supported |
| Connector orientation | Straight/right-angle where the connector system permits |
| Protection | Heat shrink, sleeve, tape, molded strain relief |
| Labeling | Custom identification |
| Packaging | Project-specific requirements |
For multi-position board or header connections with a compatible cable and mating system.
Selected according to the board interface, housing, terminals and approved wire preparation.
For designs adapting ribbon conductors to a larger external connector, subject to termination review.
IDC at one end and another connector or discrete termination at the other, with a documented circuit map.
Specify approved component part numbers and the sourcing route. No universal brand, series or pitch coverage is implied.
Review cable type, conductor count, connector, pinout, dimensions and quantity.
Cut the flat cable to specified length and prepare ends for the selected termination.
Install compatible IDC connectors, crimped contacts, soldered connections or other specified terminations.
Confirm conductor-to-pin assignment against the approved drawing.
Add strain relief, heat shrink, identification or molding where required.
Check visual, dimensional and electrical requirements under the project quality plan.
XSD’s documented resources support cable preparation, terminal crimping, connector insertion, selected soldering, vertical and low-pressure injection molding, electrical testing, dimensional inspection and tensile testing.
Cutting and dimensional preparation to approved requirements.
Installation of compatible connector systems and terminals.
Selected soldered cable assembly operations.
Optional molded strain relief or protection for compatible designs.
Circuit verification and DC resistance checks where applicable.
XSD’s broader cable manufacturing business has experience with flat ribbon cable constructions, including UL-style flat cable products. This provides familiarity with conductor arrangement, insulation and cable construction.
These UL-style constructions are listed in the broader company profile. Availability for an assembly project must be confirmed against conductor size, voltage and temperature requirements, and connector compatibility.
Style references are not a blanket product certification claim. Current datasheets and applicable certification scope should be checked for the selected cable. The supply route is agreed per project; not every assembly cable is necessarily manufactured in-house.
Inspection methods and sampling requirements are selected according to the approved drawing, connector specification and customer quality plan.
Confirm conductor-to-pin relationships against the approved pinout.
Measure where required by the product specification.
Check cable condition, connector installation and workmanship.
Verify overall length and relevant connector dimensions.
Apply where the termination or strain-relief design requires it.
The company profile also documents wire sequence testers, CCD inspection and plug/pull equipment. Signal performance depends on conductor geometry, cable construction, grounding arrangement, connector system, length and application-specific electrical requirements. High-speed performance, crosstalk and controlled impedance require a defined construction and validation method.
Internal board and control-panel connections with defined installation and service requirements.
Compact multi-conductor interconnections within electronic devices.
Controller, sensor and module connections; motion requirements need project-specific review.
Internal electronic connections in diagnostic and instrument systems, subject to the customer’s qualification requirements.
Multi-conductor internal signal and control connections.
Board-to-board and board-to-panel interconnections in integrated equipment.
Documented experience with flat ribbon cable constructions in the broader XSD cable business.
Manufacturing to customer drawings, pinouts and connector requirements.
Compatible IDC, selected crimping, soldering and connector assembly depending on design.
Optional molded protection or strain relief for compatible assemblies.
Electrical, dimensional and mechanical inspection resources matched to the quality plan.
Support for development samples, first articles and repeat production.
Share drawing, pinout and connector details.
Confirm cable construction and termination method.
Agree quantities, sourcing, tooling and commercial requirements.
Build against the agreed specification.
Confirm the accepted sample and controlled documents.
Manufacture to the released requirements.
Complete agreed checks, identification and packing.
Send the available drawing, BOM, pinout or sample information. Missing specifications can be identified during the review.
For compatible projects, XSD can assemble customer-specified IDC systems. Send the connector part number, cable specification, conductor count and pinout so compatibility and the termination process can be reviewed before quotation.
Projects may use round-conductor flat cable, rainbow cable, IDC assemblies or discrete-ended configurations. Shielded and molded versions require confirmation of cable availability, termination details and process compatibility.
Yes, according to the approved cable and connector combination. Specify conductor count, conductor size, overall length, tolerances and the reference points used to measure the finished assembly.
Color-coded ribbon constructions can be reviewed for your project. Confirm the cable part number or color sequence, conductor size and count, along with connector and circuit requirements. Availability depends on the selected construction.
Mixed termination assemblies can be reviewed, including an IDC connector at one end and another connector or discrete terminations at the other. Provide both mating interfaces and a complete conductor-to-pin map.
Heat shrink, sleeves, tape and molded strain relief can be considered where compatible with the design. Material, geometry, tooling and protection requirements are reviewed before the process is approved.
Available resources include circuit verification, DC resistance measurement, visual and dimensional inspection, and mechanical testing where applicable. The approved drawing and customer quality plan determine methods and sampling.
A sample can support the review, but hidden pin assignments, cable specifications and acceptance criteria still need confirmation. We agree the documented build requirements before proceeding with production.
Prototype and first-article requirements can be reviewed before repeat production. Quantity, component sourcing, tooling and lead time are confirmed with the quotation; no universal minimum quantity is assumed.
Send your conductor count, connector, pinout, length and protection requirements. XSD will review the assembly against the intended application and inspection needs.