Connector series
Specify the JST housing, mating connector and approved part numbers.
CUSTOM CONNECTOR ASSEMBLIES / OEM
The right wire.
The right terminal.
Every pin in its place.
XSD Harness manufactures custom cable assemblies using customer-specified JST connector systems, terminals, wires and protective components. Assemblies are produced according to approved drawings, BOMs, pinouts, dimensions and inspection requirements.
FINISHED ASSEMBLIES / XSD PHOTO LIBRARY

Configuration examples. Connector manufacturer and series are confirmed from part numbers, not appearance.
THE ASSEMBLY, NOT JUST THE CONNECTOR
A JST cable assembly combines a JST connector housing and matching terminals with specified wires, cables and optional protective components to create a finished electrical interconnect. These assemblies serve compact electronic, power, signal and control applications. Size, pitch, current requirements and locking design vary by connector family.
XSD manufactures JST-based assemblies according to customer-defined connector part numbers, wire specifications, pin assignments, cable lengths and inspection requirements.
For compact wire-to-board and low-profile designs, check the mating component as well as the cable-side housing. Pin numbering should be tied to a clearly identified viewing direction. A wire color is useful identification, but it does not replace an approved circuit assignment. These details keep the enquiry focused on the finished interconnect rather than a visually similar connector.
START WITH THE PART NUMBER
Series selection begins with your design. The families below are manufacturer references for project review, not a confirmed stock or manufacturing availability list. Exact sourcing and tooling must be confirmed before commitment.
| JST series | Interconnect type | Typical design context | Enquiry |
|---|---|---|---|
| PH ↗ | Compact wire-to-board | Small electronic assemblies | |
| XH ↗ | Wire-to-board | General electronic equipment | |
| VH ↗ | Wire-to-board | Selected power-related connections | |
| ZH ↗ | Compact, low-profile | Space-constrained devices | |
| GH ↗ | Compact locking connection | Embedded electronics | |
| SH ↗ | Very compact wire-to-board | Miniature assemblies | |
| SM ↗ | Locking wire-to-wire | Disconnectable harnesses | |
| RCY ↗ | Wire-to-wire | Compact inline connections |
Electrical ratings, compatible wire sizes and pitch depend on the exact JST series and part number and should be confirmed against the applicable manufacturer specification. Series links open official JST reference documents.
DEFINE THE BUILD
ONE DRAWING. THE REQUIRED CONNECTIONS.
JST connector systems at both ends, with the specified wire and pin assignment.
A connector at one end and conductors prepared to the specified strip or termination dimensions.
Mixed-brand interconnection manufactured to the customer BOM and approved sourcing route.
Specified ring terminals for selected power or grounding interfaces; confirm dimensions and wire compatibility.
A connectorized wire set matched to the specified PCB header or controller interface.
Several specified connectors integrated into a harness with defined branch lengths and circuit routing.
Photographs show assembly structures. Specify the required JST components separately in your BOM.
WIRE → TERMINAL → CAVITY
JST cable assembly quality depends on the correct combination of wire, terminal, crimp geometry and housing insertion. XSD uses automatic and semi-automatic terminal processing equipment depending on the terminal, wire size, production quantity and approved process requirements.
Check the terminal-to-wire fit and insertion orientation together. A compact housing does not make different terminal or wire combinations interchangeable.
THE WIRE MATTERS TOO
XSD’s broader wire and cable manufacturing background supports project-specific material review. Wire construction must suit both the application and selected terminal.
Individual power, signal or control circuits.
Grouped circuits where a cable construction is specified.
Selected signal-sensitive applications, with defined shield termination.
Where required by the approved product specification.
Appropriate vehicle or equipment applications, subject to component compatibility.
Projects aligned with the broader XSD cable manufacturing capability.
COMPACT CONNECTIONS IN YOUR EQUIPMENT
Compact board-to-wire connections for devices, controls and electronic assemblies.
Signal, power and control connections within machinery and automation equipment.
Sensors, small motors, encoders and controller interconnections.
Low-voltage electronic connections where the product specification calls for JST components.
Selected low-voltage electronic and control connections, subject to application requirements.
Signal and low-voltage control connections in battery, BMS and related equipment.
VERIFY THE CONNECTION
Incoming inspection, first-article inspection and final inspection frame the agreed production checks. Inspection methods and sampling requirements are selected according to the customer-approved drawing, JST component specification and project quality plan.
Evaluate the wire-terminal connection against approved terminal and project requirements.
Check mechanical connection strength where required.
Confirm correct wire-to-cavity connections and continuity.
Verify wire lengths and relevant assembly dimensions.
Check terminal insertion, connector housing and assembly condition.
Electrical testing can be incorporated into the approved production inspection plan.
APPROVE ONCE. BUILD TO THE APPROVED REVISION.
Drawing, JST part numbers, wire specification, pinout and quantity.
Review component compatibility, crimping method, dimensions and inspection requirements.
Manufacture prototype assemblies for approval where required.
Confirm fit, pinout, dimensions and assembly requirements.
Move to repeat production using the approved configuration.
MANUFACTURING SUPPORT
Customer-approved drawings, BOMs and connector part numbers guide the build.
Automatic and semi-automatic crimping, selected for the approved combination.
Terminal insertion and housing assembly with defined cavity orientation.
Customer-defined wire and cable constructions reviewed for compatibility.
Crimp, pull-force, dimensional and electrical inspection matched to the quality plan.
Sample builds through ongoing OEM production using the approved revision.
SEND THE SPECIFICATION
Send the available requirements together. Identify any open questions so the manufacturing review can resolve them before quotation or sample production.
PROJECT QUESTIONS
Submit the housing, terminal and mating part numbers with your drawing and BOM. XSD reviews sourcing, wire compatibility, tooling and inspection requirements before confirming the build. Approved component references guide manufacture.
Availability is confirmed per project, not across an entire catalog. The PH, XH, VH, ZH, GH, SH, SM and RCY references above help identify your enquiry. Purchasing and manufacturing review must confirm the exact parts and assembly process.
Send the exact PH, XH or VH housing and terminal part numbers for review. Family names alone do not establish component availability or tooling compatibility. Manufacturing feasibility is confirmed against your wire specification and assembly requirements.
Mixed-connector projects can be reviewed against a customer-approved BOM. Specify both connector systems, contact part numbers, wire sizes and the circuit mapping between ends. Each termination must suit the selected wire.
Yes. Define lengths, colors, branch dimensions and pin assignments in the approved drawing. Include end orientation and tolerances so assembly and inspection use the same reference.
Provide the JST series, housing and terminal part numbers, mating connector, wire gauge and type, colors, pinout, lengths, quantity, protection and test requirements. A drawing, sample or BOM helps establish the remaining scope.
Resources include terminal cross-section analysis, pull-force testing and visual inspection, alongside dimensional and circuit checks. The component specification and project quality plan determine methods, acceptance criteria and sampling.
A physical sample can support a manufacturing review. Connector identification, wire construction, hidden connections and acceptance requirements still need confirmation. Approve the resulting drawing and BOM before repeat production.
Prototype and first-article builds can be reviewed before repeat production. Share the initial quantity, expected ongoing volume and schedule. Component availability, tooling needs and sample approval determine the agreed plan.
YOUR COMPONENTS. YOUR PINOUT.
Send your drawing, JST component references and wire specification for a manufacturing review.