LVDS
TFT and LCD connections using low-voltage differential signaling, as specified by the system design.
OEM DISPLAY INTERCONNECTS
From your control board
to your display.
XSD Harness manufactures custom display cable assemblies for TFT, LCD, embedded display, control panel and electronic equipment applications. Assemblies follow customer-approved drawings, pinouts, connector specifications, cable types, dimensions and inspection requirements.

FROM THE XSD PHOTO LIBRARY
Connectorized
assembly examples
Exact interfaces and ratings follow the approved BOM.
THE CONNECTION IN CONTEXT
A display cable assembly connects a display module to a PCB, controller, driver board or other electronic device. Depending on the interface, it may carry video signals, control signals, power, backlight connections or other electrical functions.
The design depends on the interface, available routing space, connector system, pinout, shielding and electrical requirements. An LCD wiring harness must match both the display and the electronics driving it.
START WITH THE INTERFACE
Choose the interface in your design, then confirm the cable and connector system. Each assembly type is subject to component sourcing and process review.
TFT and LCD connections using low-voltage differential signaling, as specified by the system design.
Embedded DisplayPort interconnects for compact display systems and electronic equipment.
Low-profile flexible interconnections for space-constrained board-to-display routing.
Multiple miniature coaxial conductors for compact, high-density display signal paths.
Custom leads for display power, control signals, auxiliary circuits and backlight connections.
Signal, power and control circuits combined to suit the equipment architecture.
Pitch, conductor count, cable length and electrical performance depend on the selected display interface and component system.
TFT / LCD TO DRIVER BOARD
LVDS cable assemblies connect TFT/LCD modules to driver boards or control electronics using low-voltage differential signaling. For a custom LVDS cable, define the connector part numbers, pinout, wire or cable construction, shielding, length and routing requirements.
XSD reviews the specified components and termination process before confirming manufacture. Electrical performance depends on the selected components and approved assembly specification.
Show the mating-face orientation and differential-pair assignment, together with any separate power or backlight leads.
EMBEDDED DIGITAL DISPLAYS
Embedded DisplayPort assemblies are used in compact display systems with high-density digital connections. XSD reviews build-to-print eDP projects using customer-specified cables, connectors, pinouts and dimensional requirements, subject to component and process compatibility.
Specify the intended interface requirements and acceptance method. DisplayPort version, maximum data rate, resolution support and frequency range require design-specific validation.
LOW-PROFILE ROUTING
FFC and FPC interconnects suit low-profile, lightweight board-to-display connections. Customer-specified flexible cable or flexible circuit components can be reviewed for integration into a finished assembly where the required materials and processes are available.
Flexible flat cable: parallel conductors in a thin, flat cable structure.
Flexible printed circuit: a patterned circuit on a flexible substrate.
XSD’s assembly scope can include integration of specified FFC/FPC components; fabrication of the flexible printed circuit itself is not assumed. Supply the component drawing, connector interface and required end orientation.
DENSE SIGNAL ROUTING
Micro-coax assemblies route multiple miniature coaxial conductors through limited space. Projects are reviewed against the specified cable construction, compatible connector system, termination method and inspection requirements before manufacturing scope is confirmed.
Potential uses include compact displays, cameras, embedded electronics, medical displays, portable equipment and industrial panels. Cable construction alone does not establish the completed assembly’s electrical performance.
Confirm shielding and grounding continuity, routing space and required electrical validation alongside the connector and cable.
FROM SPECIFICATION TO ASSEMBLY
Review the display interface, connector part numbers, pinout, cable construction and dimensions. Resolve missing information before sample manufacture.
Cut and strip the specified cable or wire. Prepare shields and conductors to the dimensions required for the selected termination.
Apply crimping, soldering or connector assembly according to component requirements and the approved manufacturing method.
Insert or terminate conductors according to the approved circuit assignment. Control connector orientation and branch positions.
Add the specified shielding, heat shrink, sleeves, tapes or labels. Check routing and strain relief against the drawing.
Perform the electrical, visual, dimensional and mechanical checks selected in the approved quality plan. Record the agreed acceptance results.
DOCUMENTED COMPANY RESOURCES
Wire preparation, termination and assembly processes are selected for the approved component system.
Cutting and stripping to approved dimensions.
Automatic or semi-automatic termination for compatible systems.
Selected soldering operations for electronic cable assemblies.
Terminal insertion and housing assembly.
Heat shrink, sleeving, molding and dispensing where required.
The company profile also documents semi-automatic terminal processing, RJ45 crimping, low-pressure injection molding and UV dispensing. Process suitability is confirmed for each display cable design.
ACCEPTANCE AGAINST YOUR SPECIFICATION
Test methods are selected according to the approved display cable specification and customer quality requirements.
General electrical and mechanical checks do not establish high-speed interface compliance. Eye diagrams, BER, signal-integrity analysis, impedance measurements and high-speed compliance validation require a separately confirmed test plan and capability.
THE COMPLETE SIGNAL PATH
Display cable performance depends on the complete interconnect design: interface specification, cable construction, connector system, termination method, shielding and routing.
XSD manufactures assemblies according to customer-approved electrical and mechanical requirements. Include the validation requirements in the RFQ so the required methods and resources can be reviewed before commitment.
BUILT AROUND YOUR EQUIPMENT
Display interconnections in machinery and automation equipment.
Display connections in diagnostic and monitoring systems.
Compact display assemblies in electronic devices and peripherals.
Selected instrument, infotainment and display systems.
Compact display or vision-system connections in automated equipment.
Board-to-display connections in controllers, terminals and electronic modules.
MANUFACTURING THAT FOLLOWS THE DRAWING
Approved drawings, BOMs, connector specifications and pinouts guide the build.
Supported by the broader XSD wire and cable manufacturing business.
Crimping, soldering, insertion and assembly selected for component compatibility.
Small connectors and multi-conductor assemblies reviewed against actual process capability.
Electrical, dimensional and mechanical checks matched to the quality plan.
Development builds and repeat manufacturing organized around approved specifications.
SEND THE REQUIREMENTS TOGETHER
A clear drawing and pinout help establish the assembly scope. Include a sample when available and identify any unresolved requirements for review.
BEFORE YOU SEND YOUR RFQ
Submit the connector part numbers, pinout, cable construction and drawing for review. XSD evaluates the required materials, termination tooling and inspection plan before confirming an LVDS assembly project. Electrical performance follows the approved specification.
Build-to-print eDP projects are reviewed against the specified cable, connectors, pin assignment and routing requirements. Confirm component availability, process compatibility and required validation before ordering; an interface name alone does not establish data rate or resolution support.
Customer-specified flexible flat cables or flexible printed circuit components can be reviewed for integration into a finished assembly. Availability and assembly compatibility need confirmation. This service does not imply that XSD fabricates the flexible printed circuit itself.
Yes, length, branch dimensions and circuit assignment can be defined in the approved drawing. Include connector orientation, mating-face pin numbering and tolerances so both ends can be assembled and inspected against the same reference.
A sample can support a feasibility review. Please also provide the display interface, connector identification, intended application and test requirements. Hidden cable construction and electrical acceptance criteria need confirmation before a sample is converted into a production specification.
Specify the manufacturer, series, exact part numbers and approved sourcing route in your BOM. XSD reviews availability and tooling compatibility. Brand references identify requested components and do not represent an authorization or certification claim.
Documented resources include wire sequence, harness and DC resistance testing, CCD inspection, projection measurement, terminal cross-section analysis and tensile testing. The approved quality plan determines their use. Specialized signal-integrity or interface-compliance validation needs separate confirmation.
Prototype and repeat-production projects can be reviewed. Send the required quantity, expected production volume and target schedule. Sample approval, component availability and any tooling requirements determine the agreed manufacturing plan.
YOUR DISPLAY. YOUR SPECIFICATION.
Send your drawing, cable specification and pinout. We’ll review the required assembly process, components and inspection scope.